In this guide, we will walk you through How to Reset a WeMo Light Switch in Quick, Easy Steps.
WeMo Switch empowers you to control lighting in your home. In this case, you can turn on or off lights using your voice assistant or a phone app.
All you need to make this possible is to connect your switch to your home network. In fact, you don’t need a hub or subscription to activate your WeMo light switch.
But sometimes, things may go wrong, which may require a WeMo light switch reset.
Sure, it might take a bit of time to set up all the configurations from scratch again, but sometimes resetting is the only viable option you have.
There are several instances that may necessitate a WeMo light switch reset.
These scenarios include when you have changed the router settings, if setup failed, when your WeMo device is blinking blue after a firmware update, and when the WeMo app fails to detect your WeMo device.
The good thing is that resetting a WeMo switch is very straightforward. You can easily do so by engaging the reset button or just using the WeMo app.
But if you are struggling to reset a WeMo switch, you may need the right guidance.
In this guide, we will walk you through all the steps that you need to take to fully reset your WeMo switch. But before we look at each step, let’s first look in detail at why you would want to perform a reset on your WeMo switch.
Reasons for a WeMo Light Switch Reset
As with any smart device, you just can’t wake up and reset your switch. In most cases, you will only reset your WeMo switch if you experience challenges.
As mentioned above, there is more than one reason that may necessitate a WeMo light switch reset. We will look at each scenario in detail:
1. WeMo Switch Suddenly Lost Connection
Though it is uncommon for your WeMo switch to lose connection, there are times that it misbehaves.
If that is the case, you can fix the issue by simply resetting your WeMo switch.
2. When You Adjust Your WiFi Router Settings
Changing your router settings may cause your WeMo switch to stop working properly.
For this reason, you need to reset your WeMo device. Typically, this would only happen if you changed your password because it is a major security feature.
Sometimes, it could also apply if you use a different router or modem.
3. When You Want to Delete Stored or Saved Configurations
If you want to change a couple of things on your WeMo switch, such as saved settings, you can simply reset the switch.
4. Failed Setup
Another reason that could force a WeMo light switch reset is if setup fails. Irrespective of the type of WeMo switch you are using, if the setup fails, the only way to restart the setup correctly is to reset it.
There could be other minor reasons why you need to reset your WeMo switch, but the above are the most common ones.
So, now that you know the reasons that will trigger a reset, let’s now discuss the process of resetting your WeMo switch.
How to Reset Your WeMo Light Switch
If you are looking for an easy and quick way to reset your WeMo, you will find the answers in this section.
For this process, we will cover both the manual way and the digital way using the WeMo app.
If things still sound strange, don’t worry. We will walk you through each step of both methods. It is up to you to choose what works best for you.
Option 1: Performing a WeMo Light Switch Reset manually
As with many manual resets, this option involves finding and using the reset button.
As you can imagine, the process is very simple, involving only a few simple steps: Here are the actual steps you need to take to perform a WeMo light switch reset:
- Turn on your WeMo light switch.
- After that, look for the reset button on your device. This button is usually separate from other buttons the device has.
- Once you have located the button, press and hold it for a few seconds. On some devices, you only need to press the button instead of pressing and holding it.
- If you have a WeMo dimmer switch, then all you need to do is remove the cover plate and then press and hold the bar for a few seconds, usually more than five seconds.
- You can now configure your WeMo device the way you want it.
You will know if the reset is successful by checking the light. It usually turns blue if the reset is successful.
Note that different WeMo switch models have different reset buttons. So, you need to check the reset button on your device.
The good thing is that you can always consult the user manual. And if you can’t find the reset button, try reading the tiny labels on each button.
Otherwise, you can just ask someone who knows to show you or check the user manual. In most cases, it is just the bar beneath the button or the toggle. That is why it is wise to remove the cover plate.
Basically, it was as simple as that.
But if manual resetting is not your thing or you are curious to know all the methods of resetting your WeMo switch, then check the next section, where we will discuss the WeMo light switch reset via the WeMo app.
Option 2: Performing a WeMo Light Switch Reset Using the WeMo App
The above method involves a lot of pressing and waking up your device.
Here, you don’t even need to wake up your WeMo switch. Just follow these steps, and you are good to go:
Step 1: Open the WeMo App
The first thing is to access the WeMo app on your smartphone. Chances are that you have already interacted with the app if you have been using your WeMo light switch.
Otherwise, you can simply download it from the Google Play Store or Apple App Store, depending on the type of your smartphone.
Step 2: Choose Edit
Once you have opened the WeMo app, the next step is to head to the Edit setting, which is usually found at the top-right section of the screen.
Clicking on this option will reveal some configurations that you won’t find on the main interface.
Step 3: Select Reset Options
Still on the Edit interface, engage the right-side facing arrow beside the WeMo switch you intend to reset. After that, select Reset Options.
Step 4: Factory Restore
This is the stage you have been waiting for. You will notice after hitting Reset Options that there are several other options that you need to choose from. In most cases, you will be given three options.
The first option is ‘Clear Personalized Info’ while the second and third options are for changing the WiFi and restoring to factory mode, respectively.
- Clear Personalized Info option: This is the option that you will choose if you want to erase anything that is customized, including functions, icons, names, and other types of data stored on your WeMo switch. But you should not confuse this option with a factory reset. It will only reset the information stored.
- Change WiFi option: If you want to reconnect your WeMo switch to a new WiFi, you will choose this option. It will migrate with all your data.
- Factory Restore option: This is the most powerful option because it will erase all settings and restore to factory settings. What it means is that it will revert all the settings you made on your WeMo switch as if you were opening the switch for the first time. To perform a factory restore, all you need to do is make sure that your gadget is connected to the same WiFi network that your WeMo switch is linked to.
As you can see, the process is straightforward. In fact, you can finish your reset in less than five minutes.
Summing It Up
Resetting any device is an important step that helps you restore your configurations and settings to their original state.
In this case, it could mean returning to factory settings. But note that you just don’t reset your WeMo device for the sake of it.
You can only do so if you have changed the WiFi password, failed to set up the device properly, or when your WeMo switch suddenly lost connection.
The good thing is that you can perform a WeMo light switch reset in a few simple steps. It could involve just pressing and holding the reset button, but if you are tech-savvy, you may want to use the WeMo app to achieve the same outcome.
However, you should note that basic reset routines or even buttons may vary across WeMO devices.
So, try getting some pointers from the manual or ask for professional help if you are stuck. Once you have restored your device, you can go through the settings again and even store your new settings.
Also Read:
